High-Performed durable hydraulic cylinders composed by double pressure seals.
Master & Slave cylinder synchronization system.
Easy synchronization control system by special hydraulic valves.
Air cylinder operated locking device.
Platforms slide extensions.
Front detachable wheel stopper for drive through.
Rubber pads on the platform to protect the vehicle chassis.
Applicable to both in/above-ground mount.
Descend alarm signal. (CE)
De-synchronization detecting electronic photo-cell. (CE)
Hydraulic hand-pump for emergency ascend/descend. (CE)
Two step descending system gives full foot protection. (CE)
Van Adaptor kit. (OPTION)
Pit frame for in-ground type. (OPTION)


Specifications

Model No. :                                  HL-32X (INGROUND)
Lifting Capacity (kg) :                    3,300 kg / 3,000kg(CE)
Max.Lifting Height (mm) :              1,820 mm
Dimension (mm) :                         3,155(L) X 2,115(W) X 140(H) 
Power Supply & Motor :                1ph : 2.5HP, 4P, 220V, 50/60Hz
                                                   3ph : 2HP, 4P, 220/380V, 50/60 Hz
HL32X Wheel Free Scissor Lift
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
 
Premium Equipment Suppliers 2012.    Website Development by T13 Design
Mobile: 072 837 2617          Facsimile: 086 503 2194          Email: sales@premiumequipment.co.za
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HL53G Wheel Alignment Scissor Lift
High-Performed durable hydraulic cylinders composed by double pressure seals.
Sync. hydraulic block & torsion bar ensure High-Performed synchronization.
Air cylinder operate locking device with automatic engagement and pneumatic
  release system ensure safety.
Front turn-table recesses and rear sliding plates for 4-wheel alignment operation.
Hydraulic two-level 2ton scissor jack. (OPTION)
Lighting kits 4pcs. (OPTION)


Specifications

Model No. :                                HL-53G
Lifting Capacity (kg) :                  Body : 4,000 / Jack : 2,000 kg
Min/Max.Lifting Height (mm) :      260/1,900 mm
Dimension (mm) :                       5,906(L) X 2,150(W) X 260(H)
Power Supply & Motor :              1ph : 2.5HP, 4P, 220V, 60 Hz
                                                 3ph : 2HP, 4P, 220/380V, 50/60 Hz
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2PG - 4000 2-Post Lift
Patented reinforced profile design
Dual-cylinder
Steel cable synchronization system
Electromagnetic lock release system
Automatic stop at highest position
Extra high lifting height
Optional control panel
4000kg Lifting capacity
40 - 55 sec Lifting time
380V 3HP Motor
1934mm Maximum lifting height
670kg Net Weight
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LAUB
A bellows lift suitable for all cars, bakkies and 4x4's
Heavy duty construction - low maintenance
Safety locking mechanism at various heights
Stainless steel safety lock control cylinder


Specifications

Lift Capacity :                      3500 kgs
Max Lift Height :                  700 mm
Air Pressure Required :        3 - 5 BAR
Weight :                              695 KG
Colours :                             Red, Blue or Black (Arms Black)

Standard delivery includes 4 rubber blocks, 4 adjustable corner mounted arms,
2 spacer bars for 4x4 vehicles. The strongest most versatile low level hi rise lift
available. Built in Africa for Africa. Virtually maintenance free
EL 700S Low Level Lift
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
209 BASE PLATE CHAIN / OVER HALF CYLINDER
4000kg Capacity
Dual hydraulic chain-drive cylinders manufactured on ANSI standard
5/16" aircraft quality cables is used for synchronization
Self-lubricating UHMW Polyethylene slides and bronze bushings
Single-point safety release allows technician to easily release both column locks from
   one column
Automatic arm restraints
Stackable rubber pad with 1.5" and 2.5" extension adaptors
209C  4 TON CLEARFLOOR DIRECT-DRIVE 2 POST LIFT
Dual hydraulic direct-drive cylinders manufactured to ANSI standard
Super symmetric arm design, makes lifting easy.
3/8" aircraft quality cable is used for synchronization.
Single-point safety release, allows the technician to disengage both columns
   simultaneously.
Self-lubricating UHMW Polyethylene sliders and bronze bushes.
Clear-floor design, provides unobstructed floor use.
Overhead safety shut-off device prevents vehicle damage.
Stackable rubber pads and 1.5'', 2.5'', 5''adapters as standard supply.
Standard adjustable column lengths accommodate varying ceiling heights.
409 4 POST ALIGNMENT HOIST
Model:                                409A Alignment Four-post Lift
Lifting Capacity:                  4000kg
Lifting Time:                        45 Seconds
Overall Length (Inc Ramps):  5512mm
Overall Length (No Ramps):  4600mm
Overall Width:                      3208mm
Width Between Columns:     2852mm
Lifting Height:                      1915mm
Gross Weight:                     1120Kg
EM06 TYRE SERVICE HOIST
New mid-rised scissors lift model
EM06 is designed with dual mechanical locks released automatically on Peak
   innovative technology.
The EM06 is equipped with the safety stop device at 300mm from ground, both
   buttons control and tone alarm lowered from 300mm to ground for safety.
Electric/Hydraulic power system
Mechanical safety locks release,
No need of air source
Dual cylinders are applied to insure smooth lifting
C.E. stop switch and alarm tone when lowering from 300mm to ground
Movable drive-thru ramps and extended platforms accommodate varying
  wheelbase vehicles
Standard rubber pads included

Specifications

Model:                               EM06 Mid-rise Scissors Lift
Lifting Capacity:                 2800kg
Lifting Time:                       23 Seconds
Lifting Height:                     1060mm
Minimum Height:                105mm
Runway Length:                  1460mm
Overall Width:                     1960mm
Runway Width:                   600mm
Overall Length(Inc Ramps):  2100mm
Gross Weight:                    520Kg
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PX09A Scissor Alignment Lift
Model:                                  PX09A Alignment Scissors Lift
Lifting Capacity:                    4000kg
Lifting Time:                          55 Seconds
Lifting Height:                        1870mm
Minimum Height:                   300mm
Runway Length:                    4739mm
Overall Width:                       2190mm
Runway Width:                     625mm
Overall Length(Inc. Ramps):   6216mm
Gross Weight:                      1938Kg
Motor:                                  2.0/3.0HP
PEAK
PEAK
PEAK
PEAK
PEAK